Dangerous goods shipping by air requires strict adherence to the IATA Dangerous Goods Regulations (DGR) 67th Edition, which operationalizes the International Civil Aviation Organization (ICAO) Technical Instructions. Shippers must classify materials across the 9 UN hazard classes, pack them in certified UN specification packaging, affix hazard and handling labels, and execute a signed Shipper’s Declaration for Dangerous Goods (DGD). Following these technical steps protects flight safety, prevents costly airline counter rejections, and keeps your business compliant with civil aviation authorities across Canada, the United States, and Asia.
Key takeaways
- The IATA Dangerous Goods Regulations (DGR) 67th Edition took effect on 1 January 2026 and governs commercial air carriage globally alongside national frameworks like Transport Canada’s TDG Regulations and US 49 CFR.
- Regulated hazardous cargo requires tested UN specification packaging certified to Packaging Group I, II, or III standards, including a 95 kPa internal pressure differential capability for liquids.
- A completed Shipper’s Declaration for Dangerous Goods (DGD) featuring red diagonal hatched borders and at least two signed paper copies must accompany fully regulated air shipments.
- Effective 1 January 2026, a mandatory 30% State of Charge (SoC) limit applies to UN 3481 lithium-ion batteries packed with equipment over 2.7 Wh and UN 3556 battery-powered vehicles over 100 Wh.
- Under the Competency-Based Training and Assessment (CBTA) framework, all personnel who classify, pack, verify, or sign for dangerous goods must renew their certified training every 24 months.
What Are the 9 UN Classes for Dangerous Goods Shipping?
Air cargo dangerous goods regulations organize all hazardous materials into 9 standardized United Nations hazard classes according to their primary chemical and physical characteristics. Every regulated item receives a specific four-digit UN number, a Proper Shipping Name (PSN), and a hazard class that dictates whether it can fly on passenger aircraft, must be restricted to cargo-only freighters, or is forbidden from air transport entirely.
Understanding how your product fits into the 9 UN classes is the foundation of dg logistics. Even common retail goods like perfumes, aerosols, paints, and consumer electronics fall under these classifications.
| UN Class | Hazard Category | Divisions & Sub-Risks | Common Air Cargo Examples |
|---|---|---|---|
| Class 1 | Explosives | Divisions 1.1 to 1.6 (mostly forbidden on passenger aircraft; heavily restricted on freighters) | Ammunition, fireworks, distress flares, airbag inflators |
| Class 2 | Gases | 2.1 Flammable Gas, 2.2 Non-flammable/Non-toxic Gas, 2.3 Toxic Gas | Aerosols, compressed oxygen cylinders, refrigerant gases, lighters |
| Class 3 | Flammable Liquids | Assigned by flashpoint and initial boiling point into Packaging Groups I, II, or III | Paints, varnishes, perfumery products, acetone, alcohols |
| Class 4 | Flammable Solids | 4.1 Flammable Solids/Self-reactive, 4.2 Spontaneously Combustible, 4.3 Dangerous When Wet | Matches, sulphur, metal powders, sodium metal, calcium carbide |
| Class 5 | Oxidizing Substances & Organic Peroxides | 5.1 Oxidizers, 5.2 Organic Peroxides | Hydrogen peroxide, ammonium nitrate fertilizers, chemical hardeners |
| Class 6 | Toxic & Infectious Substances | 6.1 Toxic Substances, 6.2 Infectious Substances (Category A & B) | Pesticides, cyanides, clinical medical samples, diagnostic specimens |
| Class 7 | Radioactive Material | Categorized by transport index and activity (Category I-White, II-Yellow, III-Yellow) | Medical isotopes, industrial density gauges, radiopharmaceuticals |
| Class 8 | Corrosives | Substances causing full-thickness skin destruction or severe metal corrosion | Wet acid batteries, sulphuric acid, sodium hydroxide, mercury |
| Class 9 | Miscellaneous Dangerous Substances & Articles | Environmentally hazardous substances, elevated temperature goods, batteries | Lithium batteries, sodium-ion batteries, dry ice (UN 1845), magnetized material |
For classes such as Class 3, Class 4, Class 5, Class 6.1, Class 8, and Class 9, regulations further assign materials to one of three Packaging Groups (PG) based on the degree of danger they present during transport:
- Packaging Group I (PG I): High danger substances requiring the most rigorous container integrity (tested to Group X standards).
- Packaging Group II (PG II): Medium danger substances (tested to Group Y or X standards).
- Packaging Group III (PG III): Low danger substances (tested to Group Z, Y, or X standards).
Keep in mind that a commodity permitted on road or ocean vessels under US 49 CFR, Transport Canada TDG, or the IMDG Code often faces much stricter net quantity limits per package when moving by air. If you are preparing complex chemicals or industrial equipment, coordinating your air freight alongside dedicated specialized services early in the procurement cycle helps verify whether your cargo requires passenger or freighter routing.
What Packaging and Labelling Rules Apply to Air Shipments?
Regulated commodities must use UN specification packaging that has passed laboratory drop, stack, and pressure tests, paired with standardized hazard and handling labels. Simply placing hazardous goods inside a heavy-duty commercial cardboard box will result in immediate rejection at the airline cargo terminal.
Aircraft cargo holds experience significant changes in atmospheric pressure and temperature, along with vibration during flight. To prevent leaks or ruptures at altitude, the IATA DGR enforces strict physical packaging and marking standards:
- UN Specification Markings: Outer containers must display a permanent printed code proving certification (for example,
UN 4G/Y145/S/26/CDN/..., where4Gindicates a fibreboard box andYproves testing for Packaging Group II and III). - Strict Assembly Compliance: A UN-certified box is only legal if assembled exactly as tested by the packaging manufacturer. You must use the exact inner receptacles, cushioning, absorbent materials, and closure tape specified in the package’s closure instructions.
- 95 kPa Pressure Differential Test: Single and composite packagings intended to hold liquids must withstand an internal pressure differential of not less than 95 kPa (or higher, depending on the liquid’s vapour pressure) without leaking.
- Package Markings: Every outer package must clearly display the exact Proper Shipping Name (PSN), the four-digit UN or ID number (preceded by the letters “UN” or “ID”), the full legal names and physical addresses of both the shipper and consignee, and net or gross quantities where applicable.
- Diamond Hazard Labels: You must affix diamond-shaped hazard labels (angled at 45 degrees) measuring at least 100 mm × 100 mm for both the primary hazard class and any subsidiary risks. Labels cannot be folded across box edges or covered by strapping tape.
- Handling Labels: Packages containing liquid dangerous goods require two Package Orientation Arrows (red or black arrows on a white contrasting background) placed on two opposite vertical sides to show the correct upright position. Consignments forbidden on passenger planes must display the orange Cargo Aircraft Only (CAO) label on the same surface as the hazard labels.
Shippers frequently confuse Excepted Quantities (EQ) and Limited Quantities (LQ) with fully regulated cargo. While EQ and LQ allow you to use simplified packaging regimes for small inner receptacle volumes, LQ packages still must meet specific performance testing standards, bear the black-and-white diamond LQ mark (with the “Y” symbol in the centre for air transport), and be accompanied by a signed dangerous goods declaration. For shipments requiring custom crating, temperature control, or non-standard handling, working with an experienced logistics provider prevents costly repacking fees at the airport.
What Documents Are Mandatory for Dangerous Goods IATA Compliance?
Consignors must generate a verified Shipper’s Declaration for Dangerous Goods (DGD) alongside a properly annotated Air Waybill (AWB) to clear airline cargo acceptance. Without accurate, matching documentation, ground handling agents are legally prohibited from loading your freight onto an aircraft.
When preparing documentation for dangerous goods iata compliance, logistics teams must verify five core elements before tendering cargo:
- Format and Language of the DGD: The IATA Shipper’s Declaration for Dangerous Goods must be completed in English. When printed on paper, the form must feature the distinctive red diagonal hatched borders (“candy stripes”) along both vertical margins. Printing the declaration in black and white will cause automatic rejection at the carrier counter.
- Original Signed Copies: Standard air carriage requires a minimum of two original signed paper copies tendered to the airline or ground handling agent (some carriers require three). While electronic declarations (e-DGD) are expanding under IATA’s digital cargo initiatives, paper copies remain mandatory unless both the operating airline and the destination hub formally support end-to-end digital exchange. Furthermore, some regional carriers and ground handlers in East and Southeast Asia still demand physical “wet” ink signatures rather than digital signatures.
- The “Nature and Quantity of Goods” Box: The sequence of information on the DGD is strictly regulated. You must enter the UN number, Proper Shipping Name, Class or Division (and subsidiary hazard in brackets), Packaging Group, number and type of packages (e.g.,
2 Fibreboard boxes x 10 L), the exact Packing Instruction number, and any applicable authorizations. - Air Waybill (AWB) Handling Information: The “Handling Information” box on the Air Waybill must explicitly state “Dangerous Goods as per associated Shipper’s Declaration” and, if restricted to freighters, “Cargo Aircraft Only”. If you are shipping under an exemption such as Section II lithium batteries or Excepted Quantities where no DGD is required, the exact compliance statement mandated by the packing instruction must appear on the AWB.
- 24-Hour Emergency Response Telephone Number: For shipments moving into, out of, or through the United States (under 49 CFR § 172.604) and Canada, the DGD must display a 24-hour emergency response telephone number monitored at all times by an agency or individual with comprehensive technical knowledge of the hazardous material (such as Canutec in Canada or Chemtrec in the US). Listing a general office number is a regulatory violation.
A common pitfall for importers and exporters is assuming a manufacturer’s Safety Data Sheet (SDS) is enough to ship by air. While Section 14 of an SDS outlines general transport classifications, it is often compiled for ground or ocean transport, may be outdated, and rarely details air-specific inner receptacle limits or pressure requirements. Always verify SDS data against the current IATA DGR Blue Pages, and coordinate your transport documents with your customs clearance and air freight teams so that HS codes, commercial invoices, and dangerous goods declarations align at the border.
What Are the 2026 Dangerous Goods Regulations Updates for Batteries?
The 67th Edition of the IATA DGR introduced strict State of Charge (SoC) limits for battery-powered goods and codified new sodium-ion battery classifications effective 1 January 2026. Because battery thermal runaway remains one of the highest safety priorities in aviation, civil aviation authorities and airlines enforce these rules rigorously.
If your supply chain moves consumer electronics, power tools, medical devices, or electric mobility equipment across North America and Asia, your warehouse and supplier teams must apply these 2026 battery rules:
- Mandatory 30% SoC for UN 3481 (Packed with Equipment): Historically, the maximum 30% State of Charge limit applied only to standalone lithium-ion cells and batteries (UN 3480), while only being a recommendation for batteries shipped with equipment. Effective 1 January 2026, the 30% SoC ceiling is strictly mandatory for UN 3481 lithium-ion batteries packed with equipment where the cell or battery capacity exceeds 2.7 Watt-hours (Wh).
- Mandatory 30% SoC for UN 3556 (Battery-Powered Vehicles): Under the 2026 rules, vehicles powered exclusively by lithium-ion batteries (UN 3556) where the battery capacity exceeds 100 Wh must also be tendered at a State of Charge not exceeding 30% of their rated capacity.
- Sodium-Ion Battery Classifications: Sodium-ion batteries are now fully integrated into the regulatory framework under UN 3551 (Sodium-ion batteries with organic electrolyte) and UN 3552 (Sodium-ion batteries packed with or contained in equipment). Just like standalone lithium-ion batteries, standalone UN 3551 batteries are forbidden on passenger aircraft and limited to a maximum 30% SoC.
- Renamed “Battery Mark”: The standard outer package marking formerly known as the “Lithium Battery Mark” is officially renamed the Battery Mark, as it now covers both lithium and sodium-ion technologies.
- New Vehicle Cargo IMP Codes: Airlines and ground handlers now use four distinct Interline Message Procedure (IMP) handling codes in Appendix B for vehicles: RVB (Vehicle, Battery Powered), RVF (Vehicle, Flammable gas or liquid powered), RVH (Vehicle, Hybrid powered under UN 3166), and VRO (Vehicle, Other).
One operational challenge with the 2026 UN 3481 mandate is that airline acceptance agents cannot open sealed retail boxes to test the internal charge of packaged batteries at the airport counter. Instead, carriers rely on your signed legal declaration and may request manufacturer SoC verification logs alongside the mandatory UN 38.3 Test Summary before accepting the booking. Note also that Section II battery shipments—which are exempt from a full DGD—still require a verified UN 38.3 Test Summary, strong outer packaging, compliance with strict Watt-hour limits, and the outer Battery Mark. When shipping high-capacity industrial cells or electric vehicles, working with a specialized logistics team helps you confirm airline-specific battery protocols before cargo leaves the factory floor.
How Do State and Operator Variations Affect DG Logistics?
A shipment packed and documented in full compliance with standard IATA rules will still be refused at the airport if it violates specific government State Variations or airline Operator Variations. Section 2.8 of the IATA DGR catalogs thousands of national and carrier-specific exceptions that legally override the baseline manual.
Before finalizing packaging or booking space on an air freight consolidation, shippers must cross-check both sets of variations along the entire routing—including transit hubs:
State Variations (Government Rules)
State Variations are identified by a three-letter country code followed by a number (such as CAG for Canada or USG for the United States). They enforce domestic statutory laws from authorities like Transport Canada or the US Department of Transportation (DOT) / PHMSA and the FAA:
- United States (USG Variations): Enforce US DOT / 49 CFR and FAA rules on all flights entering, leaving, or transiting US airspace, including the mandatory 24-hour emergency response telephone number under 49 CFR § 172.604.
- Canada (CAG Variations): Align air shipments entering, leaving, or transiting Canadian airspace with Transport Canada’s Transportation of Dangerous Goods (TDG) Regulations.
Operator Variations (Airline Rules)
Operator Variations use a two-character airline designator followed by a number (for example, AC for Air Canada, FX for FedEx Express, 5X for UPS, or CX for Cathay Pacific). Airlines routinely impose restrictions much stricter than baseline IATA rules based on their fleet fire-suppression capabilities and internal risk policies:
- Commodity Bans: Many passenger and all-cargo carriers impose outright embargoes on standalone lithium metal batteries (UN 3090) or standalone lithium-ion batteries (UN 3480), or restrict them to pre-approved contractual accounts.
- Software and Documentation Mandates: Express integrators and major cargo airlines often require shippers to generate DGDs exclusively through validated dangerous goods software that automatically checks calculation errors, refusing manually typed or handwritten forms.
- Lower Quantity Limits and Overpacks: An airline may refuse single packagings (like steel drums without an outer box) for certain liquid classes or enforce stricter net quantity limits per package than the IATA Blue Pages allow.
When an airline acceptance agent inspects your shipment, they use a line-by-line acceptance checklist. A single missing comma in the DGD sequence, a peeling hazard label, or an overlooked Operator Variation stops the shipment immediately, triggering terminal storage fees, re-inspection charges, and flight delays. Because State and Operator Variations update throughout the year, always confirm the current rules for your specific carrier and lane before tendering cargo.
Frequently asked questions
Who is legally authorized to sign the IATA Shipper’s Declaration?
Only personnel acting on behalf of the shipper who have completed certified Competency-Based Training and Assessment (CBTA) within the past 24 months are legally permitted to sign the Shipper’s Declaration for Dangerous Goods. Under IATA’s CBTA framework, training must match the employee’s exact job function. A freight forwarder cannot “just sign” the DGD for an importer or exporter unless the forwarder has been formally contracted to do so and their CBTA-certified staff have physically inspected, packed, and verified the consignment.
Can standalone lithium-ion batteries be shipped on passenger planes?
No. Standalone lithium-ion batteries (UN 3480) and standalone sodium-ion batteries (UN 3551) are strictly prohibited from carriage as cargo on passenger aircraft worldwide. They must be shipped exclusively on dedicated freighter aircraft displaying the orange Cargo Aircraft Only (CAO) label, and their State of Charge cannot exceed 30% of their rated design capacity.
What is the difference between ICAO Technical Instructions and the IATA DGR?
The ICAO Technical Instructions for the Safe Transport of Dangerous Goods by Air are the international legal regulations published every two years by the International Civil Aviation Organization, a specialized agency of the United Nations. The IATA Dangerous Goods Regulations (DGR) is the annual operational manual published by the International Air Transport Association that incorporates all ICAO legal requirements alongside stricter commercial airline acceptance standards and Operator Variations.
Why would an airline reject a dangerous goods package packed in a UN 4G box?
Placing hazardous materials inside a box stamped with a UN 4G mark does not make the package compliant on its own. Every UN specification package is certified as a complete assembly—meaning the shipper must use the exact inner bottles or cans, the exact weight and type of vermiculite or absorbent pads, and the exact width and pattern of closure tape detailed in the packaging manufacturer’s test report. Substituting commercial inner containers or skipping the required liner invalidates the UN certification and causes airline rejection.
Need a reliable partner for dangerous goods shipping across Canada, the USA, Vietnam, and Asia? At Soleil Transportation, we coordinate compliant air, ocean, and ground freight, customs brokerage, and specialized dangerous goods handling so your regulated cargo moves safely across borders. Because dangerous goods rules and airline variations change frequently, our team helps you verify requirements with the relevant carriers and authorities before your shipment leaves the warehouse. Contact our Mississauga head office at +1 888-998-5199 (Monday to Friday, 8:30am to 4:30pm Eastern), email info@soleiltransportation.com, or request a freight quote today.

